SUPERIOR FLAT ROOF SYSTEMS Call us free on tel: 0800-389-2257
FIBREGLASS AND SPRAYED POLYUREA ROOFING SYSTEMS
Over the years through our work we have worked on thousands of flat roofs in the course of our
renovations to external walls. . Many of theses roofs needed to be supported to enable our
workers to work safely. and we was surprised that for the main area of a property it was the least
maintained . As a company that is involved in weatherproofing properties it was a natural progression for us to offer our clients a permanent solution to the age old problem of flat roof
weatherproofing.
Our main critea was a system that would be strong, could be walked on without boards, and
last at least 20 years. in 2004 we looked at all the systems available and the manufacturers
claims and guarantee offered for there systems. From experience we knew there was only
one system that would meet our requirements and back up the manufacturers claims .
After working on fiberglass roofs that had been down ( in some cases for 30 years ) we
decided to specialise in this system and trained a dedicated crew to install this type
of roofing.
FIBREGLASS RESIDENTUAL FLAT ROOFING
SPRAYED POLYUREA INDUSTRIAL ROOF COATINGS
Sprayed Polyurea Coatings are not new they have been around and in use for about
30 years in the USA and other countries throut the world.. Polyurea roof coating
is considered to be the most advanced system available and offers many advantages
to the buliding owner, specifier, and contractor
The system can be installed direct to most substrates ( after Preparation ) in even the
most extreme weather conditions. The roof can be upgraded if required with our
Sprayed Polyureane foam to reduce the heat loss through the roof.
Our GRP roofs have many advantages over all other types of flat roof systems
* 100% waterproof and fireproof.
* Very strong and durable
* 25 Year guarantee
* Seamless with no joints
* No more maintenance
* Wide range of colours / finishes
Our GRP roof system is built to an exacting standard and to comply with all
currant Building Regulations.
STANDARD INSTALLATION PROCEDURE
* Check on roof to be replaced and inform any adjacent property owners
of the work schedule.
* Remove existing roof material back to the structural joists / check on
there condition / replace any that are rotten or decayed.
* Insert new insulation if needed at this stage as to clients requirements.
* Remove and rebuild new fascias / soffits if required / needed.
* Add new firings if needed to improve water runoff.
* Lay specified deck boarding to complete roof area.
* Fix new drip rails and flashing's as needed.
* Apply 3 layers of resin bonded glass fibre to encapsulate all of
the prepared roof area.
* Apply non slip surface if required.
* Clean up and liaises with client on the completed works.
THERMASTEX COATINGS are specialists in Sprayed Polyurea Coatings and have active in this since 2005.
We have gained wealth of experience in this time on the commercial side of our company in solving a lot of
difficult roofing problems for our clients.
We have our own dedicated spraying crews who's sole activity is within the Sprayed Foam / Polyurea coating
division of our company,
What is Polyurea Coating / lineing ?
Polyurea Coatings is a seamless , monolithic, waterproof polyurethane coating.that is sprayed
into place filling voids and cracks and forming a one piece seemles finish that will last in excess
of 25 years.
ADVANTAGES OF POLYUREA COATINGS
* Highly competative roof coating system
* Encapulates asbestos fibres.
* Seamless, Lightweight, and Flexible
* Applied in any weather extreme
* Sets in seconds even on wet surfaces
* No maintenance
* High strenth and durable
* Self flashing at walls and pipes
Spray Polyurea Membrane
Spray Polyurethane Foam
Existing Substrate
INSULATED ROOF SYSTEM
Spray Polyurea Membrane
Existing Substrate
STANDARD ROOF SYSTEM
APPROVED CONTRACTORS FOR THE FOLLOWING ORGANISATIONS
THERMASTEX
SUPERIOR ROOFING SYSTEMS
COPYRIGHT THERMASTEX 2000-2011
Contact us today for a free evaluation of your project Tel: 0800-389-2257.