HomeGunex Product InfoGunex InstallationExterior Wall CoatingsExternal RenderProductsWall Tie ReplacementBrick & Stone PointingTile & Slate RoofsFlat Roof Coating Systems
Industrial CommercialTestimonialsHealth & SafetyCase Studies 1Case Studies 2Case Studies 3Case Studies 4Case Studies 5Case Studies 6Gallery
VideosVacanciesContact

This beautiful property in Hertfordshire at first glance looked in good condition, however after checking the walls it showed hundreds of spalled bricks that was beyond repair, only solution was to replace them.
SPECIFICATIONS FOR REPAIR AND SPRAY.
1    Remove all blown bricks and replace.

2    Needlegun all areas

3.   Powerwash all areas.

4    Remove and stitch up brickwork in various
      areas 

5.   Mask up all areas not to be treated.

6.   Apply a primer base coat to all prepared areas.

7.   Apply TEXCRETE coating to all prepared areas
      by high pressure spray.

8.   De-mask and clean up.

This property was treated in TEXCRETE fine texture / Colour / Suffolk Pink.
Property in Hertfordshire
Property in Surrey
SPECIFICATIONS FOR REPAIR AND SPRAY.
1    Remove all blown and eroded bricks on 
      the right hand elevation.

2    Needlegun  painted areas

3.   Powerwash  and biocide all areas.

4    Remove and replace all blown rendering.

5.   Mask up all areas not to be treated.

6.   Apply a primer base coat to all prepared areas.

7.   Apply TEXCRETE coating to all prepared areas
      by high pressure spray.

8.   Using lime mortar replace all eroded bricks that 
      was removed and point to match existing.

9   Apply by low volume spray rainstopper to
     waterproof brickwork.

10. De-Mask and clean up leave site in a clean
      and tidy condition.


Please click on pictures below to enlarge
Please click on pictures below to enlarge
Please click on pictures below to enlarge
Property in Birmingham
This Property in the Birmingham was in a very bad way. The rendering was coming off in sheets back to the brickwork and in other areas back to the laths. The original house dated back to the 1600s and has been extended over the years, the walls was a mixture of  wood, brick, stone and block and had been repaired very badly over the years. the client requested that the final finish would look uniform and without any repair scars. One of the worst parts and very  dangerous was the render on the chimney stack. It was hanging off and could have caused a problem if it came off
SPECIFICATIONS FOR REPAIR AND SPRAY.
This property in Surrey was in quite good condition considering it had not been painted for 12 years .A major problem was the right side elevation that was not painted. the soft red bricks had eroded in many areas and would need replacing.
Copyright MASTEX 2000 - 2017
High Performance Coating Systems
For further information or a free survey and quotation please call us on Telephone : 0203-693-3797 or use the contact form below.
HomeGunex Product InfoGunex InstallationExterior Wall CoatingsExternal RenderProductsWall Tie ReplacementBrick & Stone PointingTile & Slate RoofsFlat Roof Coating Systems
Industrial CommercialTestimonialsHealth & SafetyCase Studies 1Case Studies 2Case Studies 3Case Studies 4Case Studies 5Case Studies 6Gallery
VideosVacanciesContact

1    Remove all blown bricks and replace.

2    Needlegun all areas

3.   Powerwash all areas.

4    Remove and stitch up brickwork in various
      areas 

5.   Mask up all areas not to be treated.

6.   Apply a primer base coat to all prepared areas.

7.   Apply TEXCRETE coating to all prepared areas
      by high pressure spray.

8.   De-mask and clean up.