HomeGunex Product InfoGunex InstallationExterior Wall CoatingsExternal RenderProductsWall Tie ReplacementBrick & Stone PointingTile & Slate RoofsFlat Roof Coating Systems
Industrial CommercialTestimonialsHealth & SafetyCase Studies 1Case Studies 2Case Studies 3Case Studies 4Case Studies 5Case Studies 6Gallery
VideosVacanciesContact

High Performance Coating Systems
5 PROPERTIES IN BRENTWOOD / SHENFIELD ESSEX 
In the early part of 2017 we was asked to carry out works on a property in Brentwood Essex, as a result of this one contract we carried out a further 4 properties
Below shows the 5 properties and specifications for each. All 5 properties are available for inspection for interested clients. 
Property 1 
RAYLEIGH ROAD SHENFIELD
Property 3
 RAYLEIGH ROAD SHENFIELD
Property No 4
 RAYLEIGH ROAD SHENFIELD
Property No 5
 MILL HILL BRENTWOOD
This beautiful property in Shenfield  at first glance looked in good condition, however after checking the walls it showed lots bricks under the rendering spalling and would need to be replaced
1    Remove all blown rendering & replace

2    Apply fine tyrol to rear extension to match the 
      rest of the house 

3.   Powerwash all areas.

4    Remove and stitch up all cracks in various
      areas 

5.   Mask up all areas not to be treated.

6.   Apply a primer base coat to all prepared areas.

7.   Apply GUNEX  coating to all prepared areas
      by high pressure spray.

8.   De-mask and clean up.

This property was treated in GUNEX fine texture / Colour / Magnolia
*    Powerwash  all areas to be treated

*    Apply a biocide to the walls

*    Remove and replace all blown render

*    Mask all areas not to be treated

*    Remove all pipes and fittings

*    Apply a cement slurry coat to all walls
     to fill all voids and depressions

*    Apply by roller or brush a primer coat to 
     all prepared areas of the walls.

*    Apply by high pressure spray GUNEX high 
    performance coating to all areas that have 
    been prepared.

*    Demask / clean up / re-instate all pipes and 
     fittings and leave site in a clean condition.

This property was treated in GUNEX fine texture,
the colour was Pink Magnolia
*    Powerwash  all areas to be treated

*    Apply a biocide to the walls

*    Remove and replace all blown render

*    Sika Guard all parapets

*    Mask all areas not to be treated

*    Apply a slurry cement coat to all raw
     brickwork areas

*    Remove all pipes and fittin

*    Apply by roller or brush a primer coat to 
     all prepared areas of the walls.

*    Apply by high pressure spray a high 
    performance coating to all areas that have 
    been prepared.

*    Demask / clean up / re-instate all pipes and 
     fittings and leave site in a clean condition.

The property was treated with GUNEX fine texture the colour was White.
1    Remove all blown bricks and replace.

2    Needlegun all areas

3.   Powerwash all areas.

4    Remove and stitch up cracks  in various
      areas and replace the rendering.

5.   Mask up all areas not to be treated.

6.   Apply a primer base coat to all prepared areas.

7.   Apply GUNEX coating to all prepared areas
      by high pressure spray.

8.   De-mask and clean up.

This property was treated in GUNEX fine texture the colour was Cream
Property 2
MOUNT CRESCENT  BRENTWOOD
This property in Brentwood was in need of urgent weatherproofing, large areas of rendering was replaced on the rear  and side elevations. Some cavity wall ties was also replaced on the rear elevation due to corrosion 
This property in Shenfield was finished in the old "slop Dash " render to the exterior walls, apart from the new extension to the rear , the client request was that on completion the property would look as one. 
This property in Shenfield was finished smooth render, various extensions was added over the years but had blended in very poorly due to different rendering mixes and styles. Client wanted a uniform finish on all walls with no scarring. The rear elevation was also allowing damp through to the bedrooms due to the poor quality of the rendering.
*    Fix stainless steel bead to all areas

*    Apply scratch coat / then render coat

*    Apply heavy Roughcast  coat to all areas

*    Apply light bag sealing coat to Roughcast 

*    Mask all areas not to be treated  ( 4 times )

*    Remove all pipes and fittin

*    Apply by roller or brush a primer coat to 
     all prepared areas of the walls.

*     Apply second primer coat to all areas

*    Apply by high pressure spray a high 
    performance coating to all areas that have 
    been prepared.

*    Demask / clean up / re-instate all pipes and 
     fittings and leave site in a clean condition.

The property was treated with GUNEX fine texture the colour was a special mix " Farrow & Ball Shaded White " . 
This property in Brentwood would be a challenge as the client was looking for an external wall finish that would tie in with the  "1930s Look " that they was trying to replicate on their property. After several samples the client chose a heavy roughcast finish that was coated with GUNEX fine texture spray coating.. On completion with the black beams, soft red brickwork, cast stone  features,  and the  special colour chosen the results was stunning . 
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS
Click on  any  image  below to enlarge
HomeGunex Product InfoGunex InstallationExterior Wall CoatingsExternal RenderProductsWall Tie ReplacementBrick & Stone PointingTile & Slate RoofsFlat Roof Coating Systems
Industrial CommercialTestimonialsHealth & SafetyCase Studies 1Case Studies 2Case Studies 3Case Studies 4Case Studies 5Case Studies 6Gallery
VideosVacanciesContact

COPYRIGHT MASTEX  2000-2017
For further information or a free survey and quotation please call us on Telephone : 0203-693-3797 or use the contact form below.